Automotive Lifting Systems

We specialize in Auto Scissor Lifts!

These top of the car line scissor lifts are the perfect solution for general repair, wheel alignment, test lanes and car reception areas.
Click on the Adobe PDF icon to download brochure for each automotive scissor lift.

Click for Lift Accessories

 

Werther Stratos SR/M Lift

Proven performance over 20 years in USA!
Priced at $6,887


Extra-low-profile hydraulic scissor lift

New Italian Import!

Italy car scissor lifts

 

• Easy 1-click operation converts drive-on/off ramps to weight supporting platform extension for long wheel-base vehicles
• Hydraulic synchronization of platforms
• Overload safety-valve
• Safety-valve in case of sudden loss of pressure
• Automatic lowering control
• Dead man controls 24V
• Set of 4 rubber pads
• Buzzer on last portion of descent

 

Capacity 7000 lbs Download
Weight 1600 lbs
Lifting/Lowering 35/40 s
Lifting Height 1945 mm
Motor 230V-60Hz-1-phase

 

 

Werther Extra-low-profile hydraulic automotive scissor lifts

 


Werther Stratos S39 Lift

Electro-hydraulic recessed car scissor lift

New Italian Import!

Made in Italy

 

• Hydraulic synchronization of platforms
• Overload safety-valve
• Safety-valve in case of sudden loss of pressure
• Dead man controls 24V
• Set of 4 rubber pads
• Buzzer on last portion of descent

 

Capacity 8800 lbs Download
Weight 1600 lbs
Lifting/Lowering 35/40 s
Lifting Height 1.900 mm*
Motor 230V-60Hz-1-phase

 

 

Werther Stratos S39 Electro-hydraulic recessed scissor lifts for cars

 


Werther Saturnus 45

Electro-hydraulic scissor lift for automotives

New Italian Import!

Made in Italy

 

• Hydraulically synchronized platforms and lifting tables
• Overload safety-valve
• Safety-valve in case of sudden loss of pressure
• “Dead man” controls 24V
• Set of 4 rubber pads (LT and ATLT)
• Front recesses and rear slip plates for wheel alignment on models AT and ATLT

 

Capacity 10,000 lbs Download
Weight 3300-5000 lbs
Lifting/Lowering 50 s
Lifting Height 2140 mm + (565mm**)
Minimum Height 330mm
Pneumatic Feed 6-8 bar
Motor 4 HP 230V-60Hz-3-phase

 

 

Werther Saturnus 45 Electro-hydraulic scissors lifts for cars

 


Werther Saturnus 50

Electro-hydraulic scissor lift

New Italian Import!

Made in Italy

 

• Hydraulic synchronization of platforms
• Hydraulic overload safety control
• Pipe burst safety system
• Available with drive-on ramps for surface installation
• 24 V, Deadman safety controls
• Comes with 4 rubber pads (with ‘LT’ and ‘ATLT’ version)
• Recesses for turn plates and rear slip plates for wheel alignment
(on ‘LT’ and ‘ATLT’ version)
• Lateral guides for jacking beams (on ‘NGL’ and ‘ATGL’ versions)

 

Capacity 11,000 lbs Download
Weight 3300-5000 lbs
Lifting/Lowering 50 s
Lifting Height 2140 mm + (565mm**)
Pneumatic Feed 6-8 bar
Motor 4 HP 230V-60Hz-3-phase

 

 

Werther Saturnus 50 Electro-hydraulic car lift

 


Werther Hi-9 Lift

Asymmetric electro-hydraulic baseless lift with twin ram

New Italian Import!

Made in Italy

 

• Mechanical locking device
• Automatic arm locking device
• Interchangeable screw pads
• Overload safety-device
• Descent control valve
• Dead man controls
• 2-position overhead for high-vehicle clearance
• Mechanical synchronization

 

Capacity 9000 lbs Download
Weight 1576 lbs
Lifting/Lowering 35/43
Lifting Height 2011 mm
Motor 2 HP 230V-60Hz-1-phase

 

 

Werther Asymmetric electro-hydraulic baseless lift with twin ram

 


Werther 300 S Lift

Electro-mechanical twin motor, baseless lift

New Italian Import!

Made in Italy

 

• Safety nut
• Automatic arm locking device
• Dead man controls, 24V
• Adjustable overhead for low ceiling clearance
• Electromechanical safety device
• Smooth and silent operation
• Single screw pads
• Electronic synchronization

 

Capacity 6600 lbs Download
Weight 1320 lbs
Lifting/Lowering 55 s
Lifting Height 1885 mm
Motor 2x3.5HP 230V-60Hz-3-phase

 

 

Werther Electro-mechanical twin motor, baseless auto lift

 


Nuusbaum Sprinter Mid-Rise Auto Lift

Electric, Hydraulic, Single Phase, 200-240 volts

New German Import!

Made in Germany

 

• Hydraulic synchronization of platforms
• Overload safety-valve
• Safety-valve in case of sudden loss of pressure
• Dead man controls 24V
• Set of 4 rubber pads
• Buzzer on last portion of descent

 

Capacity 5,500 lbs Download
Operation Electric, Hydraulic, Single Phase, 200-240 volts
Lifting Height 39"
Lifting Time 9 seconds
Overall length 75" (platforms extend from 55-75")
Overall width 72"
Width Between Platforms 34 1/2" (no obstructions)
Shipping weight Approx 1,500 lbs
Crate dimensions 83" x 63"
Custom Colors Special order (blue is standard)

 

 

Nuusbaum Sprinter Mid-Rise Lift

 


Nuusbaum Jumbo NT Double Automotive Scissor Lifts

Fully hydraulic double scissor lift for cars with no need for compressed air and without electric switches on the lift. Space-saving, cost-efficient and functional. Out of the pit - Clear and free!

New German Import!

Made in Germany

 

• Minimum height of 3.8583"
• The new technology with redundant safety concept
• With corrugated sheet metal platforms instead of aluminium plates
• Fully hydraulic control
• New design with control lever for platform extension
• Ready to use delivery: unpack, fix dowelled, plug-in, fill-in oil and lift

 

Capacity 6,600 lbs Download
Operation 208/230 volt or 460 volt, 3 phase
Lifting Height 78.7402"

 

 

Nuusbaum Jumbo NT Double auto Scissor Lifts

 


Nuusbaum Uni Lift 8000

Hydraulic scissor lifts for transporter and light truck

New German Import!

Made in Germany

 

• Space-saving, hydraulic scissor lift with lifting capacity of 8.000 kg.
• Equipped with flat runways, ideal to lift passenger cars up to transporters
• No fixed connection between the scissors
• Low construction height allows an easy drive-on without long drive-on ramps
• Possible to install above-ground or inground

 

Lifting Capacity 8,000 lbs Download
Lifting/lowering time (sec.) 40/40
Lifting Height 1927mm
Runway width 788mm
Runway length 5500mm
Drive-on height 215mm
Total length above ground 215mm
Total width 2340mm
Motor (kW) 3,0
Power supply (V/Hz) 400/50

 

 

Nuusbaum Uni Lift 8000

 


MAHA Twin 7000 Hydraulic Double Scissor Lift

CE approved. The only lifts made in USA with NO CABLES, NO CHAINS, ALL HYDRAULIC SYNCRO!

German Engineering

Made in USA

 

• Hydraulic Double Scissor Lift -6,600 lbs lifting capacity
• Extremely low drive-over height allows for easy access
• Double Master-Slave System for synchronization and high safety standards
• No connection to compressed air is needed
• Emergency shut-off function
• High directional stability due to special scissor arm profile
• Full lifting force even in lower lifting height range

 

  Surface Mounted Flush Mounted Download
Lifting Capacity 6,600 lbs 6,600 lbs
Lifting/lowering time (sec.) 40/40 -with 3 Phase installation 40/40 -with 3 Phase installation
Lifting Height 74 3/4" 70 3/4"
Low clearance 4" N/A
Length of platform 60 3/4" - 82 3/4" 60 3/4" - 82 3/4"
Width of platform 21 3/4" 21 3/4"
Hydraulic unit (HP) 3.3 3.3
Width between platforms 31 1/2" 31 1/2"
Motor power 2 HP 2 HP
Power supply 208/230V, 60HZ,1-Ph. or 208/230V, 60HZ, 3-Ph. 208/230V, 60HZ,1-Ph. or 208/230V, 60HZ, 3-Ph.
Shipping weight 1,760 lbs 1,760 lbs

 

 

MAHA Twin 7000 Hydraulic Double Scissor Lift

 


MAHA Twin IV 7700 Automotive Scissor Lift

Lifting up to 7,700 lbs, perfect for quick lube facilities and tire shops

German Engineering

Made in USA

 

• No compressed air needed for operation
• Emergency down function
• Pipe breakage safety function adds security in lifting cycles
• Full lifting force in the lower height range thanks to innovative raining lever
• All bearing positions with self-lubricating Teflon-plain bearing bush
• No mechanical connection between both sides gives user free access between both platforms
• Continuous longitudinal adjustable support plates offer high operating comfort
• Automatic synchronization during entire lifting and lowering procedure
• Redundancy system for synchronization and high safety standards
• Low drive-over height for above ground version allows easy vehicle positioning

 

  Surface Mounted Flush Mounted Download
Lifting Capacity 7,700 lbs 7,700 lbs
Lifting/lowering time (sec.) 40 seconds* 40 seconds*
Lifting Height 75.59" 75.59"
Low clearance 4.13" N/A
Length of platform 61” - 82.67” 61” - 82.67”
Width of platform 23.81” 23.81”
Total width recommended 76.96” 76.96”
Width between platforms 29.33” 29.33”
Motor power 2.95 HP 2.95 HP
Power supply 208/230V, 60 Hz, 1-Phase 208/230V, 60 Hz, 1-Phase
Shipping weight 984 lbs 984 lbs

 

 

MAHA Twin IV 7700 Automotive Scissor Lift

 


MAHA Omer Heavy-Duty Karlift

Lifting Capacity up to 118,800 lbs

German Engineering

Made in USA

 

• Possibility for up to 48’ runway length
• Save valuable workshop space through vertical lifting
• Clear operator access from all sides
• Maximum stability in any loading condition
• Enhanced safety features through mechanical locks an each lifting cylinder
• Optimum runway synchronization through photo sensor cells
• Free standing runway design without crossbeam or base frame connection
• Maximum safety through embossed anti-slip finish on runways
• Lifting height up to 82.7” ,one of the highest in the industry
• Easy and fast Above Ground or Flush Mount installation possible
• No more tripping hazard through optional Pit Cover plates which rise and level with floor when lift goes up.

 

Lifting capacity standard (lbs) 55,000 / 66,000 / 77,000 / 88,000 / 99,000 Download
Lifting capacity with symmetric weight distribution (Kar-350) 118,800
Lifting height (") 79.6 / 82.7
Lifting time 70 / 80 seconds
Runway available length standard (“) Up to 48 feet
Runway Width (") 35 / 37
Total width (") 111 / 115
Clearance between platforms 41”
Oil Pressure (bar) 220
Power supply 230V 60HZ 3 Phase – 480V 60HZ 3 Phase
Pneumatic pressure (bar) 116
Oil capacity in gallons 13.5

 

 

MAHA Omer Heavy-Duty Karlift

 


Hydraulic Jacking Beams (Accessories)

 

496M/496P

Download

 

 

403M/403P

Download

 

 

Author: Chad Bowlin
Google+ Learn more about the author
Werther Hydraulic jacking beams

 

 
  PURVEYORS OF THE FINEST VEHICLE EQUIPMENT IN THE WORLD™